Jump to content

Make your own tawdry carbon PB knee sliders*


Basil
 Share

Recommended Posts

*Other excessive black tat is available!**

**Coming to a last ever edition Zonda near you! 

Couldn't think where to put this so stuck it here...

 

  • Like 1
Link to comment
Share on other sites

Yup, as simple as that…….🤣😂🤣😂🤣😂

Feel free to go and try it. 

  • Haha 2
Link to comment
Share on other sites

5 hours ago, jollygiant said:

Yup, as simple as that…….🤣😂🤣😂🤣😂

Well, you seem to manage it.

:P

 

  • Thanks 1
  • Haha 2
Link to comment
Share on other sites

17 hours ago, jollygiant said:

Yup, as simple as that…….🤣😂🤣😂🤣😂

Feel free to go and try it. 

I would but I get itchy just looking at it!

Link to comment
Share on other sites

36 minutes ago, jollygiant said:

Anyone done it yet??

I've been busy...

 

 

This post contains a fib!

  • Haha 1
Link to comment
Share on other sites

On 1/18/2022 at 6:35 AM, jollygiant said:

Yup, as simple as that…….🤣😂🤣😂🤣😂

Feel free to go and try it. 

With the facility and equipment they've got and the detail he's gone into I wouldn't knock it.

lets face it, Easy Composites have brought charcoal fibre to the masses, now any simpleton mouth breather with a decent oven and a vac pump can go into composite production.

You know that it's all in the tooling - good moulds and the right equipment and the splodging part with enough mess any fucktard can do.

On 1/18/2022 at 10:30 AM, Timbo S2 said:

Yup, i'd trust a carbon brake lever i've knocked up in the kitchen!!

Why not?

If it's done right there's nothing wrong with it.  And their kitchen up at easy composites is a pretty switched on setup.

Most of the commercial parts in that horrible chopped carbon finish are done the same way just on a bigger scale.

Upscale it and you essentially have SMC carbon manufacturing.

If you were to take that and do a final vac process on it after about 30 minutes it'll get a full degass as well as the pressure.

Lets face it, most people are happy to have really shit parts and bang on about how 'quality' they are just because they're bullshitted in laquer.

 

I wouldn't knock easy composites. their videos are informative and pretty good in helping laymen get their heads around all this sort of stuff.

  • Like 4
Link to comment
Share on other sites

9 hours ago, sev said:

With the facility and equipment they've got and the detail he's gone into I wouldn't knock it.

lets face it, Easy Composites have brought charcoal fibre to the masses, now any simpleton mouth breather with a decent oven and a vac pump can go into composite production.

You know that it's all in the tooling - good moulds and the right equipment and the splodging part with enough mess any fucktard can do.

Why not?

If it's done right there's nothing wrong with it.  And their kitchen up at easy composites is a pretty switched on setup.

Most of the commercial parts in that horrible chopped carbon finish are done the same way just on a bigger scale.

Upscale it and you essentially have SMC carbon manufacturing.

If you were to take that and do a final vac process on it after about 30 minutes it'll get a full degass as well as the pressure.

Lets face it, most people are happy to have really shit parts and bang on about how 'quality' they are just because they're bullshitted in laquer.

 

I wouldn't knock easy composites. their videos are informative and pretty good in helping laymen get their heads around all this sort of stuff.

Oh I’d happily rely on something someone competent has knocked up. Just not me.

  • Haha 1
Link to comment
Share on other sites

10 hours ago, sev said:

With the facility and equipment they've got and the detail he's gone into I wouldn't knock it.

lets face it, Easy Composites have brought charcoal fibre to the masses, now any simpleton mouth breather with a decent oven and a vac pump can go into composite production.

You know that it's all in the tooling - good moulds and the right equipment and the splodging part with enough mess any fucktard can do.

If it's done right there's nothing wrong with it.  And their kitchen up at easy composites is a pretty switched on setup.

Most of the commercial parts in that horrible chopped carbon finish are done the same way just on a bigger scale.

Upscale it and you essentially have SMC carbon manufacturing.

If you were to take that and do a final vac process on it after about 30 minutes it'll get a full degass as well as the pressure.

Lets face it, most people are happy to have really shit parts and bang on about how 'quality' they are just because they're bullshitted in laquer. THIS FIFTY GAZZLLION%

 

I wouldn't knock easy composites. their videos are informative and pretty good in helping laymen get their heads around all this sort of stuff.

You're not the only person to have me sussed, see below:eusa_think:

On 1/18/2022 at 11:53 AM, Damnthistinleg said:

Well, you seem to manage it.

:P

 

 

  • Haha 2
Link to comment
Share on other sites

  • 3 weeks later...
On 1/22/2022 at 8:58 PM, Timbo S2 said:

Oh I’d happily rely on something someone competent has knocked up. Just not me.

If I'd have been competent I wouldn't have knocked her up 🤷‍♂️

  • Haha 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...